Water-immiscible cooling lubricants

Wicocut F 2.16

Article Number

1202

Type-Description

Water-immiscible metalworking oil, at low viscosity range, highly activated with libricity improving EP additives, low in aromatics.
WICOCUT-F2.16
has an excellent cooling and lubricating effect and high carrying capacity of lubrication film. The specifically formulated high pressure additives (EP additives) are extremely stable and avoid absolutely certain built-up edge, especially at high-toughness materials.
WICOCUT-F2.16 plastic compatible and low oil mist.

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), as well as aluminum alloys, titanium and non-ferrous metals. Especially difficult punching and machines work (tapping, thread rolling, grinding, slotting, hobbing - fine and quick precision dancing, nibbling, deep hole drilling, etc.) as well as broaching and burnishing

appearance

bright red

WGK VKIS type

2

viscosity

(20 °C) 18 mm²/s

Order form

Wicocut F 2.28

Article Number

1203

Type-Description

Water-immiscible metalworking oil, at low viscosity range, highly activated with libricity improving EP additives, low in aromatics.
WICOCUT-F2.28 has an excellent cooling and lubricating effect and high carrying capacity of lubrication film. The specifically formulated high pressure additives (EP additives) are extremely stable and prevent the absolutely certain built-up edge, particularly for highly viscous materials.
WICOCUT-F2.28 is plastic compatible and low oil mist.

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), as well as aluminum alloys, titanium and non-ferrous metals. Especially difficult and punching machines work (tapping, thread rolling, grinding, hobbing - fine and quick precision dancing, nibbling, etc.) as well as broaching and burnishing.

appearance

light red

viscosity

(40 °C) 16 mm²/s

Order form

Wicocut F 2.54

Article Number

1204

Type-Description

Water-immiscible metal working oil at average viscosity range, highly activated with libricity improving EP additives.

WICOCUT-F2.54 is characterized by excellent adhesion and lubrication effects as well as by high capacity lubricating film. The specific effective high pressure additives (EP additives) are extremely stable and prevent built-up edge and cold shuts of substances on punching tools.
WICOCUT F2.54  tolerated by non-ferrous metals and free of heavy metals, PCBs and PCTs.
WICOCUT-F2.54 is not a dangerous substance according to the current Ordiance on Hazardous Substances
WICOCUT-F2.54 is also available in chlorine-free  (name WICOIL 754).

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and heat resisting steels and acid. Especially difficult punching and machines work (tapping, tapping, reaming, hobbing - fine blanking, nibbling deep drawing, etc.) furthermore keyways and drag areas.

WICOCUT-F 2.54 is ideally suited as forming oil in the aluminum sector.

appearance

reddish

WGK VKIS type

2

viscosity

(20°C) 44 mm²/s

Order form

Wicocut F 2.100

Article Number

1206

Type-Description

Water-immiscible metalworking oil, at high viscosity range, highly activated with lubricity improving polar and EP additives.
WICOCUT-F2.100 is characterized by high power efficiency and excellent adhesion and lubrication properties. The polar-acting additives and EP additives provide maximum lubrication oil film bearing capacity and effectively prevent the formation of built-up edge and material deposits in stamping and deep drawing tools.
WICOCUT F2.100 non-ferrous metals is tolerated and free of heavy metals, PCBs and PCTs.
WICOCUT-F2.100 is not a dangerous substance according to the current Ordinance on Hazardous Substances.
WICOCUT-F2.100 can be supplied in chlorine-free (name WICOIL 800).

Usage

For the cutting and non cutting machining also forming high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and aluminum alloys. Especially suitable for difficult-tapping and cutting operations of large-sized parts. Furthermore, for molding and sheet metal forming in consequence difficult tool for fine blanking and nibbling large metal thicknesses.

appearance

reddish brown

WGK VKIS type

2

viscosity

(40°C) 120 mm²/s

Order form

Wicocut F 2.140

Article Number

1208

Type-Description

Water-immiscible metalworking oil, high viscosity range, highly activated with libricity improving EP additives, low in aromatics.
WICOCUT-F2.140 is characterized by high power efficiency and excellent adhesion and lubrication properties. The polar-acting additives and EP additives provide maximum  lubrication oil film bearing capacity and effectively prevent the formation of built-up edge and material deposits in stamping and deep drawing tools.

Usage

For the cutting and non cutting machining or forming high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and aluminum alloys. Due to high efficiency especially suitable for difficult-tapping and cutting operations to large-sized parts for molding and sheet metal forming in consequence difficult tool to fine blanking and nibbling large metal thicknesses as well as bars and section drawing.

appearance

reddish brown

WGK VKIS type

2

viscosity

(40°C) 170 mm²/s

Order form

Wicocut F 2.270

Article Number

1209

Type-Description

Water-immiscible metalworking oil, high viscosity range, highly activated with libricity improving EP additives, low in aromatics.
WICOCUT-F2.270 is characterized by excellent adhesion and lubrication effects. The polar-acting additives and EP additives provide maximum lubrication oil film bearing capacity and effectively prevent the formation of built-up edge and material deposits in stamping and deep drawing tools.

Usage

For the cutting and non cutting machining or forming high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and aluminum alloys. Due to high efficiency especially suitable for difficult tapping-and-cut operations to large-sized parts for molding and sheet metal forming in consequence difficult tool to fine blanking and nibbling large metal thickness as well as rod and profile drag.

appearance

yellow

WGK VKIS type

2

viscosity

(40°C) 175 mm²/s

Order form

Wicocut F 2.500

Article Number

1212

Type-Description

Water-immiscible metalworking oil,  high viscosity range, highly activated with libricity improving EP additives.
WICOCUT-F2.500 is characterized by excellent adhesion and lubrication effect. The polar-acting additives and EP additives provide maximum lubrication oil film bearing capacity and effectively prevent the formation of material deposits in built-up edge and forming and deep drawing tools.

Usage

For the cutting and non cutting machining or forming high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and aluminum alloys. Due to high efficiency especially suitable for difficult tapping-and-cut operations to large-sized parts for molding and sheet metal forming in consequence difficult tool to fine-punching and nibbling large metal thickness as well as rod and profile drag.

appearance

yellow brown

WGK VKIS type

2

viscosity

(40°C) 191 mm²/s

Order form

Wicocut F 2.54 R

Article Number

1227

Type-Description

Metalworking oil,  medium viscosity range, highly activated with libricity improving EP additives.
WICOCUT F2.54-R has an excellent adhesion and lubrication effect as well as by high lubrication capacity. The specifically formulated high pressure additives (EP additives) are extremely stable and completely safe to prevent the formation of built-up edge and surfacing materials to Stanzwerkzeugen.
WICOCUT F2.54-R is compatible with non-ferrous metals

Usage

For the cutting and non-cutting machining high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and heat resisting steels and acid. Especially difficult punching and machines work (tapping, tapping, reaming, hobbing - fine blanking, nibbling deep drawing, etc.), also keyways and spaces.

appearance

red

WGK VKIS type

2

viscosity

(20°C) 73 mm²/s

Order form

Wicos VA

Article Number

1241

Type-Description

WICOS VA is a high-performance coolant based on mineral oil, not emulsified,  low viscosity range, highly activated with libricity improving EP additives. The effectiveness of existing high-pressure additives (chemically active EP additive combinations) is seen when working on the aforementioned materials in the form of longer tool life and better surface finish highlights.
Tooling costs and scrap rates are significantly reduced!
Post-processing operations are not included!
WICOS-VA is skin friendly and not a dangerous substance as defined current Ordinance on Hazardous Substances.
The product does not include: heavy metals, silicones, PCB, PCT.

Usage

Tapping, tapping up to M16, M4 tapping up, rubbing, rubbing peel, centering, fine and deep drilling, milling and turning form, also for fine blanking and embossing dies.
High alloy used and nitriding (eg 42CrMo4). Rust-and acid-resistant Cr-Ni steels, VA, Remanit, Nimonic, Discaloy, Hastelloy, Inconel (eg X 10 Cr Ni Mo Nb 1810). Aluminium and Al-Mg alloys (for example, AlMgSi1). Titanium alloys (fe.g. TiAL7 Mo4). Copper and copper alloys (e.g., G-CuSn 10 Zn).
Cu - activity no

appearance

red

WGK VKIS type

2

viscosity

(20°C) 24 mm²/s

Order form

Wicos ST 80

Article Number

1243

Type-Description

WICOS VA ST-80 is a high-tapping fluid for all materials, especially Cr-Ni steels, titanium and aluminum alloys.
WICOS VA-ST 80 is not comparable with usual cutting oils.

Application

tapping, tapping to M16, reaming, centering, very fine deep drilling, shape cutting, etc. from rust and acid resistant Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.), high-alloy tool and tempered steels, titanium, aluminum alloys , copper and copper alloys.

Usage

WICOS VA ST 80 is applied with a spray bottle, oiler drip or brush, and can also be used as a flood coolant. The product is very skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances. It contains no heavy metal compounds, no nitrosamine, no silicone and is free of PCBs, PCTs, PCDDs and PCDFs.
Cu activity no DIN 51 759th

appearance

yellowish

WGK VKIS type

2

viscosity

(20°C) 14 mm²/s

Order form

Wicos ST 80.6

Article Number

1244

Type-Description

WICOS VA-ST 80.6 is a high performance tapping fluid for all materials, especially Cr-Ni steels, titanium and aluminum alloys.
WICOS VA-ST 80.6 is not comparable with usual cutting oils.

Application
Tapping, tapping to M16, reaming, centering, very fine deep drilling, profile milling, etc. from rust and acid resistant Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.), high-alloy tool and tempered steels, titanium, aluminum alloys, copper and copper alloys.

Properties
WICOS VA-ST 80.6 contains new developed high-pressure lubrication improvers (chemically active EP-drug combinations) that are only slightly chlorinated. Special agents in combination with fat-refined oils also allow the processing of super high Cr-Ni steels.
Higher tool life and better surface finish will be gain

Usage

WICOS VA-ST 80.6 is applied with a squirt bottle, drip oilers or brush, and can also be used as a flood coolant. The product is very skin friendly and is not a dangerous substance according to the current Ordibance on Hazardous Substances. It contains no heavy metal compounds, no nitrosamine, no silicone and is free of PCBs, PCTs, PCDDs and PCDFs.

Cu activity no DIN 51 759

appearance

yellow

WGK VKIS type

2

viscosity

(20°C) 30 mm²/s

Order form

Wicos TX

Article Number

1261

Type-Description

WICOS TX, high-performance metal working oil to petroleum-based not emulsify, for heavy and heavy machining.
Not comparable with the usual cutting oils.
WICOS TX not non-ferrous metal inhibited.
WICOS TX is characterized by excellent adhesion and lubrication properties. The polar-acting additives and EP additives provide maximum oil film bearing capacity and prevent cutting and construction material deposits in stamping and deep drawing tools.

Usage

Extremely difficult tapping, tapping to M16, reaming, centering, fine and drilling depth, form milling, slotting prehardened, spaces, etc. in high-alloy hardening and heat treatable steels, high alloyed hot work tool steels, heat-resistant special steels such as Thermax, tantalum, Inconel X, etc. aluminum-and titanium-based alloys, beryllium copper and ampco.
WICOS TX is made by brush, spray bottle or drip oiler on the tool area.
WICOS TX is skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances.
WICOS TX contains no silicones, no heavy metal compounds and no metal salts. Residues are easily removed with any cleanser.

appearance

brown

viscosity

(20°C) 21 mm²/s

Order form

Wicos TX F 310

Article Number

1262

Type-Description

WICOS R-TX-310  high-performance metal working oil, petroleum-based not emulsify, for heavy and heavy machining with high levels of EP additives.
WICOS-TX-F 310 not non-ferrous metal inhibited.

Application:
Extremely difficult tapping, tapping on M30, tapping up to M16, centering, drilling very fine, form milling, spline spaces, etc. in high-alloy hardening and heat treatable steels, pre-hardened, high-alloy hot-work tool steels, heat-resistant special steels such as Thermax, tantalum, Inconel X, etc. aluminum and titanium-based alloys, beryllium copper and Ampco.

Properties:
WICOS-TX-F 310 is characterized by excellent adhesion and lubrication effects. The polar-acting additives and EP additives provide maximum oil film bearing capacity and prevent cutting and construction material deposits in stamping and deep drawing tools.

Usage

WICOS R-TX-310 applying by brush, spray bottle or drip oiler on the tool area.
WICOS R-TX-310 is skin friendly. The product does not include: heavy metals, arsenic, silicones, polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCT) and dioxin-containing substances

Pour Point: - 12 ° C DIN 51 597

concentrate viscosity (40 ° C mm2 / s)

230

appearance

brown

viscosity

(40°C) 230 mm²/s

Order form

Wicos TX F 330

Article Number

1263

Type-Description

WICOS R-TX-330, high-performance metal working oil, petroleum-based, not emulsify, for heavy and heavy machining with high levels of EP additives.
WICOS-TX-330  not non-ferrous metal inhibited.
WICOS-TX-F 330 is characterized by excellent adhesion and lubrication effects. The polar-acting additives and EP additives provide maximum oil film bearing capacity and prevent cutting and construction material deposits, also punching and deep drawing tools.
WICOS-TX-F 330 is skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances. Contains no silicones, no heavy metal compounds, metal salts and no no PCB and PCT containing materials. Residues are easily removed with any cleanser.

Usage

Extremely difficult tapping, tapping on M16, tapping up to M16, centering, drilling very fine, form milling vacate, keyways, etc. with high-alloy hardening and heat treatable steel pre-hardened, high-alloy hot-work tool steels, heat-resistant special steels such as Thermax, tantalum, Inconel X, etc. aluminum and titanium Special alloys, beryllium copper and Ampco.

appearance

red brown

WGK VKIS type

2

viscosity

(40°C) 164 mm²/s

Order form

Wicos TX F 370

Article Number

1264

Type-Description

WICOS R-TX-370 high-performance metal working oil , petroleum-based, not emulsify, for heavy and heavy machining with high levels of EP additives.
WICOS-TX-370 not non-ferrous metal inhibited.

Properties:
WICOS-TX-F 370 is characterized by excellent adhesion and lubrication effects.
The polar-acting additives and EP additives provide maximum oil film bearing capacity and prevent cutting and construction material deposits, also punching and deep drawing tools.
WICOS-TX-F 370 is skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances. Contains no silicones, no heavy metal compounds, metal salts and no no PCB and PCT containing materials. Residues are easily removed with any cleanser.

Usage

Extremely difficult tapping, tapping on M20, tapping to M18, centering, drilling very fine, form milling vacate, keyways, etc. with high-alloy hardening and heat treatable steel pre-hardened, high-alloy hot-work tool steels, heat-resistant special steels such as Thermax, tantalum, Inconel X, etc. aluminum and titanium Special alloys, beryllium copper and Ampco.
Application Instructions:
WICOS-TX-F 370 applying by brush, spray bottle or drip oiler on the tool area.

Pour Point - 12 ° C DIN 51 597

appearance

red-brown

WGK VKIS type

2

viscosity

(40°C) 205 mm²/s

Order form

Wicos VA 1CF

Article Number

1301

Type-Description

WICOS VA 1 CF is a universal high-performance cutting agent based on mineral oil, not emulsifable, equipped with high molecular  lubricating sliding film forming agents active in connection with substituted EP additives.
WICOS VA 1 CF contains no chlorine additives and is suitable for all materials.
WICOS VA 1 CF is chlorine-free, anyway by new developed, substituting lubricity improving EP achieved very good surface quality and optimum tool endurance.
Higher viscosity with better adhesion and stability of lubricating film are also available free of chlorine on this basis.

Usage

Tapping, tapping to M16, reaming, centering, very fine deep drilling, profile milling, etc. from rust and acid resistant Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.), high-alloy tool and tempered steels, titanium, aluminum alloys, copper and copper alloys.

no Cu activity

appearance

red

WGK VKIS type

1

viscosity

72 mm²/s (20°C)

Order form

Wicos VA ST 80.6 CF

Article Number

1302

Type-Description

WICOS VA ST-80.6 CF chlorine-free high-tapping fluid for all materials, especially Cr-Ni steels, titanium and aluminum alloys. (Performance-enhanced alternative to the chlorine-containing product WICOS VA).

Properties:
WICOS VA ST-80.6 CF achieves the highest performance and best surface finish despite the absence of chlorinated additives. This optimal tool endurance is achieved. The formation of built-up edge is effectively prevented. Higher viscosity with better adhesion andstability of lubricating film are also available free of chlorine.

Application:
Tapping, tapping to M16, reaming, centering, very fine deep drill, shape cutting, etc. from rust and acid resistant Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.), high-alloy tool and tempered steels, titanium, aluminum alloys, copper and copper alloys.

Usage

WICOS VA ST-80.6 CF is preferably applied with a spray bottle or brush lubrication. Use in sprayers or by flooding is also possible. It is compatible with all water-miscible cutting fluids.

appearance

reddish

WGK VKIS type

1

viscosity

(20°C) 16 mm²/s

Order form

Wicoil 580

Article Number

1311

Type-Description

WICOIL 580 is a heavy-duty cutting agent based on mineral oil, not emulsifiable, equipped with high-molecular-lubricating sliding film forming agents active in connection with substituting EP additives, low in aromatics.
WICOIL 580 is chlorine-free and suitable for all materials.

Properties:
WICOIL 580 achieved the highest performance and best surface finish despite the absence of chlorinated additives. This optimal tool enduranceis achieved. The formation of built-up edge is effectively prevented.

Higher viscosity with better adhesion and stability of lubricating film are also available free of chlorine.

Usage

Tapping, tapping to M16, reaming, centering, very fine deep drill, shape cutting, etc. from rust and acid resistant Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.) of high alloy tool and tempered steels, titanium, aluminum alloys , copper and copper alloys. In addition to stamping, fine blanking, and nibbling to 2 mm thickness.
Application:
WICOIL 580 is preferably applied with a spray bottle or brush lubrication. Use in sprayers or by flooding is also possible. It is compatible with all water-miscible cutting fluids.

appearance

reddish

WGK VKIS type

1

viscosity

(20°C) 90 mm²/s

Order form

Wicoil 616

Article Number

1312

Type-Description

WICOIL 616 is a high performance cutting, forming and punching oil, equipped with anti-corrosion additives, lubricating film improver and chemically active EP additives.
WICOIL 616 is suitable for all materials.

Properties:
Anti-fog additives with very high shear strength to ensure, in combination with an excellent vaporization behavior to improve the air conditions in the work environment. The low viscosity ensures best effect. In combination with a balanced EP performance are waiving chlorinated additives optimum surface finish and longer tool endurance - especially in the tapping and pressing - achieved. In honing the clogging of the honing stones is prevented.

Usage

Tapping, tapping to M16, thread milling rollers and, reaming, centering, very fine deep-drilling, punching, bending, nibbling and fine dancing to 1.5 mm d, and profile milling of stainless, acid and heat resistant Cr-Ni steels, titanium, aluminum and copper alloys. Best suited for honing and superfinishing.
WICOIL 616 is suitable for flood cooling can also be applied by spray bottle, oiler drip or brush. The use of spraying equipment is also possible.

Cu-Activity 1a - 1b DIN 51 759

appearance

red

WGK VKIS type

1

viscosity

(20°C) 27 mm²/s

Order form

Wicoil 628

Article Number

1313

Type-Description

WICOIL 628 is a high-performance cutting and punching oil, equipped with lubricating film improver and chemically active EP additives.
WICOIL 628 is suitable for all materials.
Anti-fog additives with very high shear strength to ensure in combination with an excellent evaporation behavior to improve the air conditions in the work environment. The low viscosity ensures better power efficiency. In combination with a balanced EP performance, optimum surface finish and longer tool endurance, especially in reaching the tapping and punching technique.

Usage

Tapping, tapping to M16, thread milling rollers and, reaming, centering, very fine deep drilling, punching, nibbling and fine dancing to 2.0 mm d, and profile milling of stainless, acid and heat resistant Cr-Ni steels, titanium, aluminum - and Cu alloys.
Also suitable for honing.
WICOIL 628 is suitable for flood cooling can also be applied by spray or drip oiler bottle or brush. The use of spraying equipment is also possible.

Cu-Activity 1a - 1b

appearance

red

WGK VKIS type

1

viscosity

(20°C) 48 mm²/s

Order form

Wicoil 754

Article Number

1314

Type-Description

WICOIL 754 is a high performance cutting, stamping and punching oil, equipped with lubricating film improvers and chemically active EP additives.
WICOIL 754 is characterized by excellent adhesion and lubrication effects as well as high capacity lubricating film. The specific effective high pressure additives (EP additives) are extremely stable and prevent the formation of built-up edge of cold welding and material-cutting tools.
WICOIL 754 is compatible with non-ferrous metals and free of heavy metals, PCBs and PCTs.
WICOIL 754 is not a dangerous substance as defined current Ordinance on Hazardous Substances.

Usage

Tapping, threading, broaching, keyway draw, stamping, fine blanking, nibbling, roll forming and deep drawing of high-alloy tool steels and tempering of stainless Cr-Ni steels, titanium and nonferrous alloys.
WICOIL 754 is suitable for flood cooling can also be applied by spray bottle or drip lubricator.

Cu-Activity 1a - 1b

appearance

reddish

WGK VKIS type

1

viscosity

(40°C) 35 mm²/s

Order form

Wicoil 800

Article Number

1316

Type-Description

WICOIL 800 is a high-performance cutting and punching oil, equipped with lubricating film improver and chemically active EP additives.
Anti-fog additives with very high shear strength to ensure in combination with an excellent evaporation behavior to improve the air conditions in the work environment. The specific viscosity adjustment allows for better adhesion, in combination with a balanced activation of EP-optimal surface finish and longer tool life can be, especially in the non-cutting deformation reached.

Usage

Tapping, threading, broaching, keyway, stamping, fine blanking, nipples, roll forming and deep drawing of high-alloy tool and tempered steels, stainless, acid and heat resistant Cr-Ni steels, titanium, aluminum alloys, copper and copper alloys.

Cu-Activity 1a - 1b

appearance

yellow-brown

viscosity

(40°C) 130 mm²/s

Order form

Wicoil 840

Article Number

1317

Type-Description

WICOIL 840 is a high-performance cutting and punching oil, equipped with lubrication enhancing lubricating film forming agents and chemically active EP additives.
WICOIL 840 is suitable for all materials.
Anti-fog additives with very high shear strength to ensure in combination with an excellent evaporation behavior to improve the air conditions in the work environment. The relatively high viscosity allows for better adhesion. In combination with a balanced EP performance, optimum surface finish and longer tool endurance - particularly in the non-cutting deformation - achieved.

Usage

Tapping, Abwälzstoßen, Keilnutenziehen, stamping, fine blanking, nibbling, roll forming and deep drawing of high-alloy tool and tempered steels, stainless, acid and heat resistant Cr-Ni steels, titanium, aluminum alloys, copper and copper alloys.
WICOIL 840 is suitable for flood cooling can also be applied by spray bottle, oiler drip or brush.

Cu-Activity 1a - 1b

WGK VKIS type

2

viscosity

(40°C) 130 mm²/s

Order form

Wicoil 620

Article Number

1328

Type-Description

Water-immiscible metalworking oil, low viscosity range, highly activated with lubricity improving EP additives, low in aromatics.
WICOIL 620 is characterized by excellent cooling and lubricating effects and high oil film strength. The specifically formulated high pressure additives (EP additives) are extremely stable and prevent the formation of built-up edge, particularly at highly viscous materials.
WICOIL 620 low in oil mist and evaporation.

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), as well as aluminum alloys, titanium and non-ferrous metals. In particular, for honing. Furthermore to the fine precision and speed stamping, cutting steel, rolling, nibbling, as well as rubbing, burnishing and hobbing.

appearance

yellow

WGK VKIS type

1

viscosity

(20°C) 24 mm²/s

Order form

Wicoil HRO 65

Article Number

1331

Type-Description

Rapeseed oil-based water immiscible metal working oil, medium viscosity range, highly activated with lubricity improving EP additives.
WICOIL HRO 65 is characterized by excellent cooling and lubricating effects and high oil film strength. The specifically formulated synthetic lubrication improvers and high pressure additives (EP additives) are extremely stable and prevent the formation of built-up edge, particularly for highly viscous materials.
WICOIL HRO is 65 low in oil mist and evaporation, therefore, suitable for minimum quantity lubrication.

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels, also for aluminum alloys, titanium and non-ferrous metals. In particular, for honing. Furthermore, the product gets to the fine precision and fast blanking, nibbling, rubbing, hobbing, tapping, thread milling, thread cutting, tapping up to M16, and thread milling suitable.

appearance

yellow

WGK VKIS type

1

viscosity

(20°C) 50 mm²/s

Order form

Wicoil Micro 5045

Article Number

1341

Type-Description

WICOIL MICRO 5045 is based on dearomatised hydrocarbon mixture coolant with highly effective lubricating film formers. The product is suitable for all materials.

Properties:
Micro WICOIL 5045 was developed on the basis of WICOIL MICRO 6046 but with a lower viscosity. Due to the exceptionally high power capability will be particularly in drilling and tapping < M 0.5 M the very fine shavings flushed out effectively.
WICOIL MICRO 5045 is physically harmless and not a dangerous substance according to the current Ordinance on Hazardous Substances. It is free of silicones, heavy metals, aromatic hydrocarbons, PCBs, PCTs and PCDFs.

Usage

Cutting processing in the segment of micro system technology: very fine and micro drilling, precision milling, precision driving, thread drill very fine and engraving of stainless steels, Al-Mg and Ti-alloys, copper and CuNiFe alloys, platinum, gold, silver and non ferrous alloy. Non-cutting processing in the precision engineering (contacts): fine blanking, bending, stamping and drawing of the above materials for plate thicknesses <0.38 mm.

appearance

clear, yellow

WGK VKIS type

1

viscosity

(20°C) 12 mm²/s

Order form

Wicoform S 26 C

Article Number

1404

Type-Description

WICOFORM S-26C is a cooling lubricant based on highly refined paraffinic oils with lubricating substances chemically active and highly effective lubricant film forming agents. Optimum cooling and lubricating effect, especially with carbide tools, and improve the surface finish. The product exhibits very good wetting. WICOFORM S-26C offers high pressure absorber ccapacity and excellent price performance.

Usage

Cutting processing (tapping, reaming, milling and turning and sawing form) of alloy steels, Cr-Ni steels, titanium, aluminum alloys, non ferrous and copper alloys.
Non cutting processing (tapping, precision and speed stamping, bending, stamping, rolling and deep drawing) as on deep drawing presses with progressive die of Cr-Ni steels and galvanized, aluminum and copper alloys.

appearance

bright-yellow

WGK VKIS type

2

viscosity

(20°C) 35 mm²/s

Order form

Wicoform S 46 - C1

Article Number

1406

Type-Description

WICOFORM S 46 C1 is a special cutting oil based on hochhydrierter solvent raffinates, low in mist and evaporation, with active lubricating forming agents and highly effective EP additives.
Properties:
WICOFORM-S 46 C1 is characterized by excellent adhesion and lubrication effects and high capacity lubricating film. The specifically formulated to prevent high-pressure additives are extremely stablel prevent the formation of built-up edge.
WICOFORM S-46 C1 contains little chlorine additives
Safety:
WICOFORM S 46-C1  mineral oil and physiologically. It is hypoallergenic and is not a dangerous substance according to the current Ordinance on Hazardous Substances. It contains no silicone or other heavy metal compounds.

Usage

Tapping to M30, tapping up to M 8, form milling, keyways and grooves pulling, sweeping in so unalloyed structural steels, high alloy Cr-Ni steels (VA, Remanit, Nimonic, Inconel, etc.) in quenched and tempered steels, aluminum and copper alloys.
WICOFORM S 46-C1 can be applied by minimal quantity cooling lubrication (MQL), for example by Fluidtec-Microspray. Inquiry requested.

appearance

bright-yellow

WGK VKIS type

2

viscosity

(40°C) 46 mm²/s

Order form

Wicoform S 70 C

Article Number

1410

Type-Description

WICOFORM S-70 C is a cooling lubricant based on highly refined paraffinic oils with lubricating substances chemically active and highly effective lubricant. The product is suitable for all materials, but preferably for alloyed and coated contact materials.

Usage

Cutting processing (stamping, fine blanking, stamping, deep drawing, stretch bending, tapping, nibbling, and also to shape rolls).
Also suitable for cutting machining tapping, reaming, milling form.

appearance

brown

corrosion protection with DIN 51360/2 3

Kupferkorrosion Note 1

WGK VKIS type

2

viscosity

(20°C) 300 mm²/s

Order form

Wicodraw 1436

Article Number

1436

Type-Description

WICODRAW 1436 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. The remaining thin film of lubricant evaporates after a short time, almost residue-free.
Properties: activation level = 15%
WICODRAW 1436 S generates an optimal cooling and lubricating effect, especially with carbide tools - built-up edges are effectively prevented. It is the highest performance result from increased tool life and better surface finish. The remaining thin film of lubricant evaporates after a short time almost residue-free. Thus, a clean and environmentally friendly work is guaranteed.
WICODRAW 1436 S is not a dangerous substance according to the current Ordinance on Hazardous Substances. The product does not include: heavy metals, silicon, PCB, PCT, sulfur, chlorine and other halogens.

Usage

Non-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc., and metal-cutting machining operations, such as tapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys.

appearance

clear, light blue

WGK VKIS type

1

viscosity

(20°C) 3 mm²/s

Order form

Wicodraw 1437

Article Number

1437

Type-Description

WICODRAW 1437 S is a synthetic cooling lubricant with chemically-active substances and highly effective lubricant film former. The product is suitable for all materials. The product leaves low residue film.


Properties:    activation level = 80%
WICODRAW 1437 S generates an optimal cooling and lubricating effect, particularly at HM-punching and cutting tools - built-up edges are effectively prevented. The remaining thin lubricating film gives an omission time-consuming cleaning processes.
Safety:
WICODRAW 1437 S is not a dangerous substance according to the current Ordinance on Hazardous Substances. Observe all statutory requirements for components and is compatible with all polymer plastics.
The product does not include: heavy metals, silicones, PCB and PCT, chlorine and other halogens.

Usage

Non-cutting processing stamping, fine blanking, nibbling deep drawing, etc. cutting processing: high performance sawing and milling and threading, shapes, etc. rubbing of aluminum, aluminum alloys, in particular profiles, magnesium, titanium and titanium alloys.

appearance

clear, blueish

WGK VKIS type

1

viscosity

(20°C) 24 mm²/s

Order form

Wicodraw 1438

Article Number

1438

Type-Description

WICODRAW 1438 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. The product evaporates residue-free.

Applications:
WICODRAW 1438 S was developed for non-cutting metal working (cold forming) such as stamping, fine blanking, nibbling, deep drawing, etc., of iron, iron alloys, galvanized iron, developed steel, aluminum and aluminum alloys.
Properties:     activation level = 2%
WICODRAW 1438 S generates an optimal cooling and lubricating effect, particularly at HM-punching tools, built-up edge is effectively prevented. It is the highest performance results in disclaim of chlorinated EP additives. The remaining thin film of lubricant evaporates after a short time residue-free. Thus, a clean and environmentally friendly work is guaranteed.

Usage

WICODRAW 1438 S is preferably sprayed by a spray-cooling after Fluidtec spray cooling system ultra-thin on the parts or the tool. The order can also be performed by using conventional application methods. Even the smallest doses bring above-average in service life improvement
WICODRAW 1438 S is not a dangerous substance according to the current Ordinance on Hazardous Substances. Observe all legal requirements regarding ingredients and is compatible with all common machine materials. The product does not include heavy metals, silicones, PCB, PCT, sulfur, chlorine and other halogens

appearance

clear, bright

WGK VKIS type

1

viscosity

(20°C) 1,9 mm²/s

Order form

Wicodraw 1439

Article Number

1439

Type-Description

WICODRAW 1439 S is a cooling lubricant based on dearomatized hydrocarbons readily volatilized lubricant improver. After the airing, there remains a slight residual lubricating film.

Properties:   activation level = 50%
WICODRAW 1439 S generates an optimal cooling and lubricating effect, especially with carbide tools. Built-up edge can be effectively prevented. It is the highest performance result from increased tool life and better surface finish. Thus, a clean and environmentally friendly work is guaranteed.
WICODRAW 1439 S is not a hazardous substance according to the current Ordinance on Hazardous Substances . The product does not include: heavy metals, silicon, PCB and PCT, chlorine and other halogens.

Usage

Non-cutting metal working, e.g. stamping, fine blanking, nibbling, deep drawing, etc. and cutting operations, such as tapping, high-speed milling, turning and cutting aluminum, aluminum alloys, magnesium, titanium and titanium alloys.
Application Instructions:
WICODRAW 1439 S
is preferably sprayed by a spray-cooling after Fluidtec spray cooling system ultra-thin on the parts or the tool.
Even the smallest doses bring above-average in cutting performance in MQL area.

appearance

clear, light blue

WGK VKIS type

1

viscosity

(20°C) 4,4 mm²/s

Order form

Wicodraw V 1595/10

Article Number

1440

Type-Description

WICODRAW-V 1595/10 is a cooling lubricant based on dearomatized hydrocarbons with the readily volatile lubricant improvers, chlorine-free. The product evaporates depending on the proportion of the ester component almost residue-free.
Application:
Cutting processing (drilling, turning, milling and sawing) of aluminum, aluminum alloys, magnesium, titanium and titanium alloys. Non-Cutting forming (stamping, fine blanking, and nibbling) for all contact materials, aluminum and copper alloys, such as on Bihler machines welding gun.
Properties:
Optimum cooling and lubricating effect, particularly at HM-stamping tools. The remaining thin film of lubricant evaporates after a short time residue-free. Thus, a clean and environmentally friendly work is guaranteed.

Usage

WICODRAW-V 1595/10 is preferably sprayed by a spray-cooling after Fluidtec spray cooling system ultra-thin on the parts or the tool.  Even the smallest doses bring above-average in service life improvement. We are happy to help.
WICODRAW-V 1595/10 contains no silicone.
WICODRAW-V 1595/10 is not a dangerous substance according to the currentOrdinance on Hazardous Substances. The product does not include: heavy metals, silicones, PCB, PCT, chlorine and other halogens.

appearance

clear, bright

WGK VKIS type

1

viscosity

(20°C) 4 mm²/s

Order form

Wicoform S 26

Article Number

1447

Type-Description

WICOFORM S-26 is a cooling lubricant with chemically-active lubricating substances and highly effective lubricant film formers. The product is suitable for all materials. Optimum cooling and lubricating effect, especially with carbide tools and improve the surface finish. The product exhibits very good wetting.
WICOFORM S-26 offers high pressure absorber capacity and excellent price performance.

Usage

Cutting processing  (tapping, reaming, milling and turning and sawing form) of alloy steels, Cr-Ni steels, titanium, aluminum alloys, non ferrous and copper alloys.
Non-cutting (tapping, precision and speed stamping, bending, stamping, rolling and drawing, for example on Bihler stamping machines) of Cr-Ni, aluminum and copper alloys. In addition to stamping with progressive dies.

appearance

yellow - brown

WGK VKIS type

1

viscosity

(20°C) 20 mm²/s

Order form

Wicodraw S 640

Article Number

1449

Type-Description

WICOFORM S-640 is a new type of cooling lubricant with highly effective lubricant film formers, evaporate residue-free. It is chlorine-free and contains no mineral oil of the conventional kind.
Application:
Cutting processing precision machining (drilling, turning, milling) with Fluidtec-spray cooling. Non-cutting forming (stamping, fine blanking, stamping, bending and Feinstgewindeschneiden, as all contact materials made of precious metals and copper-beryllium alloys Bihler stamping machines, welding guns).
Properties:
Optimum cooling and lubricating effect, especially with carbide tools. Oil-free filming. The remaining thin film of lubricant evaporates  within a few minutes residue-free. Cleaning of machined parts can be omitted. Thus, clean and environmentally friendly work.

Usage

WICOFORM-640 is preferably sprayed by a spray-cooling after Fluidtec spray cooling system ultra-thin on the parts or the tool. Even the smallest doses bring above-average in service life improvement We are happy to help.
Safety / Disposal:
WICOFORM S-640 is free of aromatics, amines, CFC's, PCB, PCT and PCDFs. It contains no Silikon.Im scope and is properly handled WICOFORM-S 640 not a dangerous substance according to the current Ordinance on Hazardous Substances . Protect the container against heat and cold.

appearance

clear

WGK VKIS type

1

viscosity

(20°C) 3 mm²/s

Order form

Wicoform S 40

Article Number

1463

Type-Description

WICOFORM S-40 is a metal forming cooling lubricant based on highly hydrogenated solvent-raffinates, low in mist and evaporation, with lubricating film former and highly activated lubricity improving EP additiven.
WICOFORM-S 40 is suitable for all materials.
WICOFORM-S 40 is characterized by excellent adhesion and lubrication, as well as high lubrication capacity. The specifically formulated extreme pressure additives are extremely stable and prevent the formation of built-up edge.

Usage

Cutting processing (tapping, reaming, milling and sawing) of steel alloys, aluminum, aluminum and copper alloys, magnesium, titanium and titanium alloys.
Non-cutting forming (stamping, fine blanking, nibbling, also tube bending, tapping, stamping, rolling and drawing) of all steel alloys, aluminum and copper alloys and Cu-Ni-Fe alloys.

appearance

clear, light yellow

WGK VKIS type

1

viscosity

(20°C) 36 mm²/s

Order form

Wicoform F 5022

Article Number

1465

Type-Description

WICOFORM F-5022 is a synthetic cooling lubricant with chemically-active substances and highly effective lubricant film former.The product is suitable for all materials.
Properties:

Optimum cooling and lubricating effect, especially in grades surface carbide tools, and improve. The product exhibits very good wetting.  By MQL an additional evaporative cooling is produced.
WICOFORM F-5022
offers high pressure absorber capacity and excellent price performance.
WICOFORM F-5022
is chlorine-free, physiologically acceptable and not a dangerous substance according to the current Ordinance on Hazardous Substances.

Usage

Cutting processing (tapping, reaming, form milling and turning and sawing) of alloy steels, Cr-Ni steels, titanium, aluminum alloys, non-and Cu-Legierungen. Non-cutting processing (tapping, precision and speed stamping, bending, stamping, rolling and drawing, for example on Bihler stamping machines) of Cr-Ni, aluminum and copper alloys.
Application Instructions:
WICOFORM F-5022 is preferably sprayed through micro jet sprayers (eg Fluidtec-spray-cooling system) mist-free wafer-thin on the parts or the tool. This above-average cutting efficiency can be achieved at minimal dosage.

appearance

bright / blueish

WGK VKIS type

1

viscosity

(20°C) 105 mm²/s

Order form

Wicodraw 1481 S

Article Number

1481

Type-Description

WICODRAW 1481 S is a stamping and forming oil for highest stress, equipped with lubricity improver lubricant film former based on synthetic Ester. WICODRAW 1481 S does not contain ingredients such as corrosiv lubricity chlorine, phosphorus, molybdenum or sulfur compounds. It is suitable for all materials, but also for alloyed and coated contact materials, such as CuZn, CuSn6, Cu-Be-coated steel (Cr-Ni) steel with Cu, Ag contacts, etc.
Application:
WICODRAW 1481 S is used for non-cutting forming (stamping, fine blanking, and nibbling, and easier for deep drawing operations) of all contact materials, unalloyed and alloyed steels, aluminum and copper alloys in difficult forming operations.
Properties:
WICODRAW S 1481 contains high-quality synthetic esters and oils with very high shear strength, which ensure optimum cooling and lubricating effect. Thus the highest surface quality and tool life are achieved. Burn above 240 ° C remaining ash residue and residue-free. Such a clean and environmentally friendly work is guaranteed.

Usage

WICODRAW 1481 S is suitable for flood cooling can also be applied by spray bottle, oiler drip or brush. The use of spraying equipment is also possible.
WICODRAW 1481 S is skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances.  It does not include organic or inorganic metal salts and no silicone.

appearance

reddish

WGK VKIS type

1

viscosity

(20°C) 40 mm²/s

Order form

Wicoform 1486

Article Number

1486

Type-Description

WICODRAW 1486 is a stamping and forming oil for highest stress, equipped with lubricity improver lubrication film former based on synthetic esters.
WICODRAW 1486 contains no corrosiv lubricity constituents such as chlorine, phosphorous, molybdenum or sulfur compounds. It is suitable for all materials, but also for alloyed and coated contact materials, such as CuZn, CuSn6, Cu-Be-coated steel (Cr-Ni) steel with Cu, Ag contacts, etc.
Application:
WICODRAW 1486 is used for non-cutting forming (stamping, fine blanking, and nibbling, and for ease of thermoforming operations) of all contact materials, unalloyed and alloyed steels, aluminum and copper alloys in difficult forming operations (eg cold working).
Properties:
WICODRAW 1486 contains high-quality synthetic esters and oils with very high shear strength, which ensure optimum cooling and lubricating effect. Thus the highest surface quality and tool life are achieved. Burn above 240 ° C remaining ash residue and residue-free. Such a clean and environmentally friendly work is guaranteed.

Usage

WICODRAW 1486 is suitable for flood cooling can also be applied by spray bottle, oiler drip or brush. The use of spraying equipment is also possible.
WICODRAW 1486 is skin friendly and not a dangerous substance according to the current Ordinance on Hazardous Substances. It does not contain organic or inorganic metal salts and no silicone .

appearance

clear, bright

WGK VKIS type

1

viscosity

(40°C) 53 mm²/s

Order form

Wicos W 1878

Article Number

1501

Type-Description

Water-immiscible metalworking oil, medium viscosity range, with high levels of EP additives improving lubrication.
WICOS W-1878 is characterized by excellent adhesion and lubrication effects and high capacity lubricating film. The specific effective high pressure additives (EP additives) are very stable and prevent built-up edge of cold welding and material-cutting tools.
WICOS W-1878 is compatible with non-ferrous metals and free of heavy metals, PCBs and PCTs.
WICOS W-1878 is not a dangerous substance according to the current Ordinance on Hazardous Substances .

Usage

For the cutting and non-cutting high-alloy Cr-Ni steels (VA, Remanit, Nimonic, Hastelloy, Inconel, etc.), tools and tempered steels and heat resisting steels and acid. Especially difficult and punching machines work (tapping, tapping, - fine blanking, nibbling, and band shape rolls, etc.) as well as medium wire drawing and fine wire drwaing of copper and copper alloys.

appearance

red-brown

WGK VKIS type

2

viscosity

(20°C) 59 mm²/s

Order form

Wicoil RSM 60

Article Number

1521

Type-Description

WICOIL RSM-60 is a built-in mineral oil lubricants for heavy pipe bending with environmentally friendly, high-pressure lubrication and absorptive lubricant film former.
WICOIL RSM-60 has excellent lubricating, sliding and adhesion effect, which " flowing pressure distribution", even under extreme bending conditions. The remaining oil film could be removed by cold and hot water or alkaline cleaning products from the tubes (re-emulsified). Soldering and welding can be performed without additional purification.

Usage

Cold bending of pipes and profiles made of rolled steel, alloy steel, stainless Cr-Ni stainless steels and copper-aluminum alloys and CuNiFe, titanium, etc. in addition to tapping, punching and deep drawing.

appearance

yellow-brown

WGK VKIS type

2

viscosity

(20°C) 170 mm²/s

Order form

Wicoplant 1534 T

Article Number

1534

Type-Description

WICOPLANT T 1534 T is a novel high perfomance deep drawingand pipe bending in a medium viscosity for the extreme deformation of Cr-Ni steel, stainless and alloy steels.
This environmentally friendly product of the WICOPLANT series has been developed by using high-quality, mostly readily biodegradable, renewable resources.
WICOPLANT 1534 T viscosity can easily support over pressure piston, diaphragm and gear pumps. Due to the thixotropic behavior of dripping is prevented by the workpiece, so that even an application by brush or roller possible. The floors are visible clean in the periphery.

Usage

WICOPLANT 1534 T is re-emulsified and can be easily removed by hand-hot water, so that subsequent welding work is carried out smoothly. A disturbance in the clarifier effluent treatment plants is carried by the resulting WICOPLANT 1534 T according to our current state of knowledge is not expected.
WICOPLANT 1534 T should be classified on the basis of the raw materials used as a particularly user friendly.
WICOPLANT 1534 T is not a dangerous substance according to the current Ordinance on Hazardous Substances.
Low-viscous are available on request.

appearance

brownish, unclear

WGK VKIS type

1

viscosity

(20°C) 540 mm²/s

Order form

Wicoplant 1534 T / 16

Article Number

1536

Type-Description

WICOPLANT 1534 T/16 is a novel high performance deep drawing and pipe bending oil in a medium-viscosity for the extreme deformation of Cr-Ni steel, stainless and alloy steels.
This product of the environmentally friendlyWICOPLANT series has been developed by using high-quality,
most readily biodegradable, renewable resources.
WICOPLANT 1534 T/16 features for extreme deep drawing and bending conditions necessary lubricants, lubricating and adhesive effects. The remaining film can be removed with all cleaning and degreasing agents.

Usage

WICOPLANT 1534 T/16 is ideal for non-cutting forming (deep drawing) of alloy steels, CuNiFe alloys and Cr-Ni stainless steels for cold bending of tubes and profiles in narrow radii mandrel bending machines. In addition to the pre-bent hydroforming in the area.

appearance

brownish, unclear

WGK VKIS type

1

viscosity

(20°C) 172 mm²/s

Order form

Wicos RB 8112

Article Number

1561

Type-Description

WICOS RB-8112 is a special tube bending lubricating grease, reemulgierend, equipped with highly effective lubricant and lubrication film-forming agents. WICOS RB-8112 is completely chlorine-and nitrite-free and contains no silicones.
WICOS RB-8112 has excellent adhesion and lubrication-lubricating effects. Cracking can be avoided. The adhesive film of grease can be removed easily with water, so that soldering and welding operations are carried out smoothly without further purification.

Usage

Cold bending of pipes and profiles made of rolled steel, alloy steels, Cr-Ni and stainless steel (VA, Remanit, Hastelloy, etc.), aluminum and copper alloys and titanium on hydraulic pressure bending machines with and without thorns as well as multi-benders black of the Company Robitec-GmbH, Cologne, and Lang GmbH, Michel city / Odw.
When tapping the paste can be applied by brush to the cutting zone.

appearance

brown-yellow

WGK VKIS type

1

viscosity

(20°C) pastös

Order form

Wicos RB 1565

Article Number

1565

Type-Description

WICOS RB-1565 is a synthetic, mineral oil-free lubricant for tube bending with environmentally friendly, high-pressure absorber lubrication and lubricating film former
WICOS RB-1565 contains no silicones and no heavy metal compounds.
WICOS RB-1565 is has excellent lubricating, sliding and adhesion effects, which "fluid pressure distribution," permits. The remaining oil film can be removed easily by cold and hot water or alkaline cleaning products from the tubes (re-emulsified). Soldering and welding can be performed without additional purification. The lubricating film remains burnt residue, without harmful vapors.

Usage

Cold bending of pipes and profiles made of rolled steel, alloy steel, stainless Cr-Ni and stainless steel (VA, Remanit, Hastelloy) and copper-aluminum alloys, titanium, etc. In addition to tapping, punching and deep drawing.
WICOS RB-1565 is just neat to use. The product can be applied by once-through or drip lubrication or with spray equipment (MQL system after Fluidtec principle). Please obtain information.

appearance

red

WGK VKIS type

1

viscosity

(20°C) 90 mm²/s

Order form

Wicos Compound

Article Number

1571

Type-Description

WICOS COMPOUND is a high-tapping paste with highly effective lubricating film formers. The residues are re-emulsified and therefore is easily removable with water.
During thread cutting or thread whirling very good adhesion and optimum lubrication. The sliding film is adapted primarily to the necking of tubes made of high-toughness steel and non-ferrous alloys. The remaining fat is extracted of the water and in a short time removable without residue.

Usage

For cutting operations e.g. tapping, threading, drilling and thread whirling, necking of tubes of different wall thicknesses and alloy and stainless steels, also for chipless machining, such as Stamping, and precision punching.
WICOS COMPOUND is applied by brush or lubrication felt.
The application should be used WICOS COMPOUND pasty.
Protect from heat and direct sunlight.

appearance

brown

WGK VKIS type

2

viscosity

(20°C) pastös

Order form

Wicoil SF 118

Article Number

1601

Type-Description

WICOIL SF-118 has strong flushing action and good ability for settling , which made rapid removal of grinding abrasion and rapid settling of the abrasive sludge in the settling tank.
The wheels are kept open and stay grippy, this pressure can be kept low.

Usage

WICOIL-SF 118 is used for honing and grinding of steels, tool steels, hard metals, nonferrous metals and oxide ceramics.
WICOIL-SF 118 is applicable for grinding tools with diamond and boron nitride (CBN) coating.

appearance

clear, brown

WGK VKIS type

1

viscosity

(20°C) 20 mm²/s

Order form

Wicoil SF 187

Article Number

1602

Type-Description

WICOIL SF-187 is a chlorine-free carbide metal grinding oil based on dearomatized and highly hydrogenated manufacturing oils, water immiscible.
WICOIL SF-187 is designed particularly odorless. The use of aromatic-base oil meets the highest demands on preventive health and occupational safety.
Due to the strong flushing action of the oil , is the fine abrasive grit rapidly removed and will in the oil reservoir sediment short term due good ability for settling
Copper corrosion grade 1

 

Usage

WICOIL SF-187 is especially suitable for grinding of hard metals.
WICOIL SF-187 is used for grinding nonferrous metals and flat glass. The special alloy combination of polar additives and EP additives provides micrographs of high surface quality.
WICOIL SF-187 can also be used for treatments such as high-speed milling up to 60 thousand rpm (max. 12 mm) or slot milling, boring, peeling and grating.

appearance

bright, clear

WGK VKIS type

1

viscosity

(20°C) 9,4 mm²/s

Order form

Wicoil SF 195

Article Number

1605

Type-Description

WICOIL SF-195 is a chlorine-free carbide metal grinding oil based on dearomatized and highly hydrogenated manufacturing oils, not water miscible.
Propoerties:
WICOIL SF-195 is designed particularly odorless. CBN and diamond tools handy to stay longer. The use of aromatic-base oil meets the highest demands on preventive health and occupational safety.

Due to the strong flushing action of the oil , is the fine abrasive grit rapidly removed and will in the oil reservoir sediment short term due good ability for settling

Usage

 

WICOIL SF-195 is especially suitable for grinding and super finishing of hard metals.
WICOIL SF-195 is used for grinding and super finishing of nonferrous metals and flat glass. The special alloy combination of polar additives and EP additives provides micrographs of high surface quality.
WICOIL SF-195 can also be for very fine as slot milling, boring, peeling and grating can be used.

Pour Point: about - 15 ° C, DIN ISO 3016

Copper corrosion grade 1

 

 

appearance

bright, clear

WGK VKIS type

1

viscosity

(40°C) 4 mm²/s

Order form